Hỗ trợ khách hàng
Hotline: 043 8210929 - 043 9721787
Email: headoffice@binhan.com.vn
Website: http://binhan.com.vn
Kiểu: CL8
Nhà sản xuất: Visonic - Israel
Nhà phân phối: Công ty Cổ phần Bình An
Mô tả

The CL-8 is a self-contained, highly versatile microprocessor-controlled digital keypad for access control and/or remote control applications. Operating from an AC or DC supply, the purpose of the CL-8 is to keep unauthorized  people off restricted premises, while permitting authorized personnel to enter. When any one of the correct access codes is keyedin and identified by the internal microprocessor, it energizes a built-in highpower relay which  unlocks the door or performs and desired switching function.

Unlike older systems which respond to a single code, the CL-8 responds to 56 individual access codes - each assigned to an authorized user or group of users. Each code may be periodically changed or cancelled by a simple,  straightforward programming sequence. Data is entered into the EEPROM via the keyboard, but programming can only be carried out by “master code” holders. Electrical power failures do not affect the stored data which is  retained during power loss.

The CL-8 cannot be defeated by unauthorized entry of random codes, since a penalty timer locks out the keypad for 30 seconds after three consecutive inputs of erroneous codes. An ambush digit may be programmed and entered as a suffix to the code if the door has to be opened under duress.

A special request-to-exit input is provided for opening the door from inside without a code, thereby permitting exit from the protected area.

Thông số kĩ thuật


Code composition: 1 to 8 digits, any combination

Keypad type: 12 keys, 3 x 4, tactile operation

Operating Voltage: 9-16 or 22-26 V AC/DC

Current drain @12VDC

Stand-by-state: 15 mA

Relay and auxiliary output active: 55 mA

Power failure immunity: EEPROM retains all programmed data even during total power loss

Relay contact ratings: 10 A, 28 V AC or DC

Relay control:Programmable for contact closure duration of 1-98 sec, or for toggle (latch) mode

Auxiliary and panic output current sinking capability: Up to 100 mA (protected by 18 ohm series resistor)

LEDs: Green provides status information, red and yellow have 1 k series resistors and terminals for external connections

Operating temperature:

CL-8: 0°C to 65°C (32°F to 150°F)

CL-8A: -20°C to 65°C (-4°F to 150°F)

Dimensions: (W X H X D): 11.8 X 7.2 X 3.3 cm (4-5/8 x 2-3/16 x 1-3/8”)

Models Available:

CL-8: Standard model

CL-8A: Low temperature

CL-8T: With Tamper switch

CL-8AT: Low temperature with Tamper switch

Thông tin đặt hàng
Địa chỉ: 218 A Lò Đúc -Hai Bà Trưng - Hà Nội.
Điện thoại: (84.4) 38.210929 * 39.721787
Fax: (84.4) 38.210597
E-mail: headoffice@binhan.com.vn
Địa chỉ: 285/14 Đường Cách mạng Tháng 8 - Phường 12 - Quận 10 – TP HCM
Điện thoại: (84.8) 22428595
Fax: (84.8) 38624985
E-mail: branch@binhan.com.vn
Thống kê
Truy cập  114898
Online  16
  Trang chủ  |  Giới thiệu  |  Sản phẩm  |  Tin tức  |  Dự án  |  Chứng nhận  |  Liên hệ Bản quyền 2010 thuộc về Công ty cổ phần Bình An

Liên kết : Triệt lông nách vĩnh viễn